Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Digital speedo fix
#1
I have a '90 Mk7 Bill Blass model with the digital speedo, it stops advancing after 85MPH, and starts back at zero when you hit 125MPH and climbs back up from ther so far I have seen "7MPH" or 132MPH. and still climbing, but I was coming up on traffic and had to shut down. You can find out the actual speed by reseting the tripminder while driving but its really dangerous to look down to the console at high speeds. I'm looking for info on how to make the speedo read after 85. I found an article on a t-bird site on where to solder a jumper wire, but it didnt work on the '90 panel. Anyone out there have any ideas? Thanks, Rick
[COLOR="Blue"]342 stroker, Edelbrock heads, GT 40 intake, 30lb injectors converted to mass-air. [/COLOR]

[COLOR="Red"][SIZE="3"]If it has Teats or Tires... Your gonna have problems with it[/SIZE][/COLOR]
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)