Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
my mark dose not ride comfortable anymore
#11
Yeah indeed to move on and get this car finished. Miss driving the blk se and red se hasn't.t left the garage since 2008.
[SIGPIC][/SIGPIC]



[COLOR="Silver"]1991 light T/P LSC[/COLOR]/ BBK Catted X-Pipe/1 5/8 short headers, 3.73 gears/Mac Cover.Blue 9MM wires,MSD dist. Cap and coil. TC front Sway Bar/addco 415G rear, GT40p heads, TFS valve and spring kit, BBK CAI, Cobra Intake, 65MM TB,SVO 1.6 RR(dyno and SCT Tune shortly.

1991 Ebony Clear coat SE/Triple Black/Built AOD-2800 TC/Pauls red trans bushings/Sunroof/Sport Seat Delete

[COLOR="Red"]1992 Electric Currant" Red SE[/COLOR]/SunRoof/White Interior(needs some work)
Reply
#12
dont worry mine has more trailer miles from 2004 to now than it has on the odometer.
1990 LINCOLN MARK VII





LINCOHOLICS 4 LIFE



http://www.classicLincolns.com Classic Lincolns

http://www.fordforum.com Ford Forum

http://www.fordforums.com Ford Forums

http://www.gmvsford.com GM vs Ford

http://www.lincolnforums.com Lincoln Forums

http://www.lincolnsonline.com LincolnsOnLine

http://www.lincolnvscadillac.com Lincoln vs Cadillac

http://www.LSCridersPlus.com LSC Riders PLUS!

http://www.superford.org SuperFord.Org

http://www.westcoastlincolns.net West Coast Lincolns
Reply
#13
(06-21-2012, 11:08 PM)43rocks link Wrote:I have upgraded all struts and shocks to KYB and the KYB strut mounts( per the tech page) i replaced 1 driver side wheel bearing, had an alignment and balanced all 4 tires. lots of vibration at high speed 65 to 90. possible causes other than the left front tire having cupping due to bad shock and bearing.

I am thinking of doing rack bushings, motor mounts,trans mount and body bushings, as these have never been done since i bought car in 2004, may be OE.

sway bar link and bushings are good not broke or deformed, sway bar frame bushings replaced when i put on TC sway bar and adco rear in 2006 or 2007. I have not replaced in control arm bushings.

Am I headed in right direction, the front tire with the cupping wear an issue should i replace with new?
that cupping is a major issue with vibration
[Image: S7300073-1.jpg]
Reply
#14
Late reply, tires replaced on front , less vibration now, rack bushings in the future and rear UC and LC bushings need replaced, should be soild then, now caris down dur to Brake fluid leak, it is up high so I am looking at the hoses under ABS unit, man I mean it leakes like half the fluid out on a 30 mile trip. Hope that is the problem, or my have to start stripping parts from the BLK Se.
[SIGPIC][/SIGPIC]



[COLOR="Silver"]1991 light T/P LSC[/COLOR]/ BBK Catted X-Pipe/1 5/8 short headers, 3.73 gears/Mac Cover.Blue 9MM wires,MSD dist. Cap and coil. TC front Sway Bar/addco 415G rear, GT40p heads, TFS valve and spring kit, BBK CAI, Cobra Intake, 65MM TB,SVO 1.6 RR(dyno and SCT Tune shortly.

1991 Ebony Clear coat SE/Triple Black/Built AOD-2800 TC/Pauls red trans bushings/Sunroof/Sport Seat Delete

[COLOR="Red"]1992 Electric Currant" Red SE[/COLOR]/SunRoof/White Interior(needs some work)
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)