Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
engine stand bolts
Well I finally have time to start working on the 83 tbird again. However I have a slight problem. I want to get my 351W bolted up to my engine stand but I lost the bolts to bolt the engine up. Does anyone know the bolt sizes, grade and length you would use to bolt a 351W to an engine stand?
2000 Saturn Sw2

Daily Driver

1993 Ford Thunderbird 5.0 H.O V-8

Spare car

1983 Ford Thunderbird

351W 5.8L

[Image: car1.jpg]
I think I6/SB fords are 7/16" course thread bolts. I would use grade 8 just to be on the safe side. For the length, you will have to measure the depth that the bolt passes through and add at least 3/4" to that.

Make sure you have extra thick washers for the head part of the bolt so it doesnt pull through the plate arms. I usually use 3 plain washers for every bolt.
ASE Master Tech with 15 years experience

Daily Driver: 1994 GMC Sonoma, Extended Cab, 2WD, with the 4.3 V6 Vortec.
Future plans/projects: Finishing that darn 64 Malibu SS

Forum Jump:

Users browsing this thread: 1 Guest(s)